2386 XXXI International Mineral Processing Congress 2024 Proceedings/Washington, DC/Sep 29–Oct 3
Calvo, G., &Valero, A. (2022). Strategic mineral resources:
Availability and future estimations for the renewable
energy sector. Environmental Development, 41, 100640.
Castro, S., Lopez-Valdivieso, A., &Laskowski, J. (2016).
Review of the flotation of molybdenite. Part I: Surface
properties and floatability. International Journal of
Mineral Processing, 148, 48–58.
Chander, S., &Fuerstenau, D. (1972). On the natural
floatability of molybdenite. Trans. AIME, 252, 62–69.
Colbert, P. (1980). Gold ore treatment at Emperor
Gold Mining Co. Ltd, Vatukoula, Fiji. Mining and
Metallurgical Practices in Australasia (Ed. JT Woodcock),
492–494.
Cornwall, W., &Hisshion, R. (1976). Leaching of telluride
concentrates for gold, silver and tellurium-Emperor
process. Transactions of the Society of Mining Engineering
of AIME, 260, 108–112.
Dippenaar, A. (1982). The destabilization of froth by sol-
ids. I. The mechanism of film rupture. International
Journal of Mineral Processing, 9(1), 1–14.
Dunne, R. (2016). Flotation of gold and gold-bearing ores.
In Gold Ore Processing (pp. 315–338). Elsevier.
Ellis, S., &Deschênes, G. (2016). Treatment of Gold–
Telluride Ores. In Gold Ore Processing (pp. 919–926).
doi: 10.1016/b978-0-444-63658-4.00051-7.
Farrokhpay, S., Filippov, L., &Fornasiero, D. (2021).
Flotation of fine particles: A review. Mineral Processing
and Extractive Metallurgy Review, 42(7), 473–483.
Fuerstenau, M. C., Miller, J. D., &Kuhn, M. C. (1985).
Chemistry of flotation. Society of Mining Engineers of
the American Institute of Mining, Metallurgical and
Petroleum Engineers.
Goldfarb, R. J., Berger, B. R., George, M. W., &Seal II, R.
R. (2017). Tellurium (1411339916).
Green, M. A. (2009). Estimates of te and in prices from
direct mining of known ores. Progress in Photovoltaics:
Research and Applications, 17(5), 347–359. doi:
10.1002/pip.899.
Hayes, S., Spry, P., Spaleta, K., Skidmore, A., Witte, R.,
Knight, N., Knight, D., &Milke, K. (2013).
Mineralogy and chemistry of tellurium in the hypo-
gene and supergene environments.
Hessite. (2024). mindat.org. Retrieved January 8 2024 from
https://www.mindat.org/min-1881.html.
Hulliger, F. (2012). Structural chemistry of layer-type phases
(Vol. 5). Springer Science &Business Media.
Jin, J. (2016). Wetting and interfacial water analysis of
selected mineral surfaces as determined by molecular
dynamics simulation and sum frequency vibrational spec-
troscopy The University of Utah].
Johansson, G., &Pugh, R. (1992). The influence of parti-
cle size and hydrophobicity on the stability of mineral-
ized froths. International Journal of Mineral Processing,
34(1‑2), 1–21.
Johnston, W. (1933). Tellurides: Problem or alibi? Eng.
Min. J, 134, 333.
Josephson, A. E. (2016). The behavior of tellurium dur-
ing copper ore processing at the American Smelting and
Refining Company (Tucson, AZ). University of Alaska
Fairbanks.
Khoshdast, H., &Sam, A. (2011). Flotation frothers:
review of their classifications, properties and prepara-
tion. The Open Mineral Processing Journal, 4(1), 25–44.
Lu, Z., &Lawson, F. (1994). Metallurgical properties of
synthetic sylvanite. Proceedings of The AusIMM, 299(2),
89–93.
Mahmoudi, A., Shakibania, S., Mokmeli, M., &Rashchi, F.
(2020). Tellurium, from Copper Anode Slime to
High Purity Product: A Review Paper. Metallurgical
and Materials Transactions B, 51(6), 2555–2575. doi:
10.1007/s11663-020-01974-x.
Makuei, F. M., &Senanayake, G. (2018). Extraction of
tellurium from lead and copper bearing feed materials
and interim metallurgical products – A short review.
Minerals Engineering, 115, 79–87. doi: 10.1016
/j.mineng.2017.10.013.
McNulty, B. A., &Jowitt, S. M. (2022). Byproduct criti-
cal metal supply and demand and implications for the
energy transition: A case study of tellurium supply and
CdTe PV demand. Renewable and Sustainable Energy
Reviews, 168, 112838.
Nassar, N. T., Kim, H., Frenzel, M., Moats, M. S., &
Hayes, S. M. (2022). Global tellurium supply poten-
tial from electrolytic copper refining. Resources,
Conservation and Recycling, 184, 106434.
Padmanaban, V., &Lawson, F. (1991). Metallurgical
properties of synthetic calaverite. Proceedings of The
AusIMM, 296(1), 31–37.
Partridge, A., &Smith, G. (1971). Small-sample flotation
testing: a new cell. Trans. Inst. Min. Metall., Sect. C,
80, 118.
Salopek, B., Krasic, D., &Filipovic, S. (1992). Measurement
and application of zeta-potential. Rudarsko-geolosko-
naftni zbornik, 4(1), 147.
Schlesinger, M. E., King, M. J., Sole, K. C., &Davenport, W.
G. (2011). Byproduct and Waste Streams. In Extractive
Metallurgy of Copper (pp. 415–426). doi: 10.1016/
b978-0-08-096789-9.10021-6.
Calvo, G., &Valero, A. (2022). Strategic mineral resources:
Availability and future estimations for the renewable
energy sector. Environmental Development, 41, 100640.
Castro, S., Lopez-Valdivieso, A., &Laskowski, J. (2016).
Review of the flotation of molybdenite. Part I: Surface
properties and floatability. International Journal of
Mineral Processing, 148, 48–58.
Chander, S., &Fuerstenau, D. (1972). On the natural
floatability of molybdenite. Trans. AIME, 252, 62–69.
Colbert, P. (1980). Gold ore treatment at Emperor
Gold Mining Co. Ltd, Vatukoula, Fiji. Mining and
Metallurgical Practices in Australasia (Ed. JT Woodcock),
492–494.
Cornwall, W., &Hisshion, R. (1976). Leaching of telluride
concentrates for gold, silver and tellurium-Emperor
process. Transactions of the Society of Mining Engineering
of AIME, 260, 108–112.
Dippenaar, A. (1982). The destabilization of froth by sol-
ids. I. The mechanism of film rupture. International
Journal of Mineral Processing, 9(1), 1–14.
Dunne, R. (2016). Flotation of gold and gold-bearing ores.
In Gold Ore Processing (pp. 315–338). Elsevier.
Ellis, S., &Deschênes, G. (2016). Treatment of Gold–
Telluride Ores. In Gold Ore Processing (pp. 919–926).
doi: 10.1016/b978-0-444-63658-4.00051-7.
Farrokhpay, S., Filippov, L., &Fornasiero, D. (2021).
Flotation of fine particles: A review. Mineral Processing
and Extractive Metallurgy Review, 42(7), 473–483.
Fuerstenau, M. C., Miller, J. D., &Kuhn, M. C. (1985).
Chemistry of flotation. Society of Mining Engineers of
the American Institute of Mining, Metallurgical and
Petroleum Engineers.
Goldfarb, R. J., Berger, B. R., George, M. W., &Seal II, R.
R. (2017). Tellurium (1411339916).
Green, M. A. (2009). Estimates of te and in prices from
direct mining of known ores. Progress in Photovoltaics:
Research and Applications, 17(5), 347–359. doi:
10.1002/pip.899.
Hayes, S., Spry, P., Spaleta, K., Skidmore, A., Witte, R.,
Knight, N., Knight, D., &Milke, K. (2013).
Mineralogy and chemistry of tellurium in the hypo-
gene and supergene environments.
Hessite. (2024). mindat.org. Retrieved January 8 2024 from
https://www.mindat.org/min-1881.html.
Hulliger, F. (2012). Structural chemistry of layer-type phases
(Vol. 5). Springer Science &Business Media.
Jin, J. (2016). Wetting and interfacial water analysis of
selected mineral surfaces as determined by molecular
dynamics simulation and sum frequency vibrational spec-
troscopy The University of Utah].
Johansson, G., &Pugh, R. (1992). The influence of parti-
cle size and hydrophobicity on the stability of mineral-
ized froths. International Journal of Mineral Processing,
34(1‑2), 1–21.
Johnston, W. (1933). Tellurides: Problem or alibi? Eng.
Min. J, 134, 333.
Josephson, A. E. (2016). The behavior of tellurium dur-
ing copper ore processing at the American Smelting and
Refining Company (Tucson, AZ). University of Alaska
Fairbanks.
Khoshdast, H., &Sam, A. (2011). Flotation frothers:
review of their classifications, properties and prepara-
tion. The Open Mineral Processing Journal, 4(1), 25–44.
Lu, Z., &Lawson, F. (1994). Metallurgical properties of
synthetic sylvanite. Proceedings of The AusIMM, 299(2),
89–93.
Mahmoudi, A., Shakibania, S., Mokmeli, M., &Rashchi, F.
(2020). Tellurium, from Copper Anode Slime to
High Purity Product: A Review Paper. Metallurgical
and Materials Transactions B, 51(6), 2555–2575. doi:
10.1007/s11663-020-01974-x.
Makuei, F. M., &Senanayake, G. (2018). Extraction of
tellurium from lead and copper bearing feed materials
and interim metallurgical products – A short review.
Minerals Engineering, 115, 79–87. doi: 10.1016
/j.mineng.2017.10.013.
McNulty, B. A., &Jowitt, S. M. (2022). Byproduct criti-
cal metal supply and demand and implications for the
energy transition: A case study of tellurium supply and
CdTe PV demand. Renewable and Sustainable Energy
Reviews, 168, 112838.
Nassar, N. T., Kim, H., Frenzel, M., Moats, M. S., &
Hayes, S. M. (2022). Global tellurium supply poten-
tial from electrolytic copper refining. Resources,
Conservation and Recycling, 184, 106434.
Padmanaban, V., &Lawson, F. (1991). Metallurgical
properties of synthetic calaverite. Proceedings of The
AusIMM, 296(1), 31–37.
Partridge, A., &Smith, G. (1971). Small-sample flotation
testing: a new cell. Trans. Inst. Min. Metall., Sect. C,
80, 118.
Salopek, B., Krasic, D., &Filipovic, S. (1992). Measurement
and application of zeta-potential. Rudarsko-geolosko-
naftni zbornik, 4(1), 147.
Schlesinger, M. E., King, M. J., Sole, K. C., &Davenport, W.
G. (2011). Byproduct and Waste Streams. In Extractive
Metallurgy of Copper (pp. 415–426). doi: 10.1016/
b978-0-08-096789-9.10021-6.