13
Centers for Disease Control and Prevention, National
Institute for Occupational Safety and Health,
Division of Physical Sciences and Engineering.
[47] Hedlund, U., Ledin, M. C., &Jonsson, H.
(2020). Respirable Dust and Lung Function in
Underground Miners: A Cohort Study. Occupational
and Environmental Medicine, 77(6), 415–420.
doi: 10.1136/oemed-2019-106384.
[48] Hendrix, B. (2023). The Mine Silica Health
Administration: It Looks Like msha Started With The
OSHA Rule And Proceeded To Cut Everything That
Looked Even Remotely Reasonable. Rock Products,
126(8), 58–58.
[49] Kissell, F. N. (2003). Handbook for Dust Control in
Mining. Centers for Disease Control and Prevention,
National Institute for Occupational Safety and
Health.
[50] Lawrence, A., Thollander, P., Andrei, M. and Karlsson,
M., 2019. Specific energy consumption/use (SEC) in
energy management for improving energy efficiency
in industry: Meaning, usage and differences. Energies,
12(2), p.247.
[51] Liu, T. and Liu, S., 2020. The impacts of coal dust
on miners’ health: a review. Environmental Research,
190, p.109849.
[52] Marais, J., Maré, P., &Brink, A. (2019). Automation
in Mining: The Advancement of Automation in the
Mining Industry and the Potential Impact on Mine
Workers. Journal of the Southern African Institute
of Mining and Metallurgy, 119(4), 281–288.
doi: 10.17159/2411-9717/2019/v119n4a8.
[53] Mazurek, J.M., Laney, A.S. and Wood, J.M., 2010.
Coal Workers’ Pneumoconiosis-Related Years of
Potential Life Lost Before Age 65 Years--United
States, 1968–2006. JAMA: Journal of the American
Medical Association, 303(16).
[54] Najjarpour, M., Jalalifar, H. and Norouzi-Apourvari,
S., 2022. Fifty years of experience in rate of pen-
etration management: Managed pressure drilling
technology, mechanical specific energy concept, bit
management approach and expert systems-A review.
Journal of Petroleum Science and Engineering, 208,
p.109184.
[55] Paluchamy, B., Mishra, D.P. and Panigrahi, D.C.,
2021. Airborne respirable dust in fully mechanised
underground metalliferous mines–Generation, health
impacts and control measures for cleaner production.
Journal of Cleaner Production, 296, p.126524.
[56] Peng, S. (2020). Modern Coal Mining Technology and
Safety. Journal of Mining Science, 56(4), 659–671.
doi: 10.1134/S1062739120040184.
[57] Proud, L., Tapoglou, N., Wika, K.K., Taylor, C.M.
and Slatter, T., 2023. Role of CO2 cooling strategies
in managing tool wear during the shoulder milling
of grade 2 commercially pure titanium. Wear, 524,
p.204798.
[58] Ramzi, R. and Bakar, E.A., 2018, May. Optical wear
inspection of countersink drill bit for drilling opera-
tion in aircraft manufacturing and assembly industry:
a method. In IOP conference series: materials science
and engineering (Vol. 370, No. 1, p. 012041). IOP
Publishing.
[59] Reynolds, L.E., Blackley, D.J., Laney, A.S. and
Halldin, C.N., 2017. Respiratory morbidity among
US coal miners in states outside of central Appalachia.
American journal of industrial medicine, 60(6),
pp.513–517.
[60] Shekarian, Y., 2020. An investigation of the effects of
mining parameters on the prevalence of coal worker’s
pneumoconiosis (CWP) risks among the US Coal Miners.
New Mexico Institute of Mining and Technology.
[61] Stuart, D., &O’Leary, T. (2020). Automation and its
Impact on the Mining Industry: A Study of Emerging
Technologies. Mining Engineering, 72(11), 23–28.
[62] Su, Y., Li, C., Zhao, G., Li, C. and Zhao, G., 2021.
Prediction models for specific energy consumption of
machine tools and surface roughness based on cutting
parameters and tool wear. Proceedings of the Institution
of Mechanical Engineers, Part B: Journal of Engineering
Manufacture, 235(6–7), pp.1225–1234.
[63] Thomas, L.P., 2023. Global standardization of
coal resources and reserves. In The Coal Handbook
(pp. 53–83). Woodhead Publishing.
[64] Uzun, M., Usca, Ü.A., Kuntoğlu, M. and Gupta,
M.K., 2022. Influence of tool path strategies on
machining time, tool wear, and surface rough-
ness during milling of AISI X210Cr12 steel. The
International Journal of Advanced Manufacturing
Technology, 119(3), pp.2709–2720.
[65] Williams, G., 2023. Social and economic costs and
benefits of coal. In The coal handbook (pp. 3–29).
Woodhead Publishing.
[66] World Coal Association. (2023). The Role of Coal in
the Energy Transition. Retrieved from https://www
.worldcoal.org.
[67] Xu, Y., Wang, S., &Li, H. (2018). Abrasive Wear in Coal
Cutting Tools: An Experimental Investigation. Wear,
408–409, 76–83. doi: 10.1016/j.wear.2018.05.015.
Centers for Disease Control and Prevention, National
Institute for Occupational Safety and Health,
Division of Physical Sciences and Engineering.
[47] Hedlund, U., Ledin, M. C., &Jonsson, H.
(2020). Respirable Dust and Lung Function in
Underground Miners: A Cohort Study. Occupational
and Environmental Medicine, 77(6), 415–420.
doi: 10.1136/oemed-2019-106384.
[48] Hendrix, B. (2023). The Mine Silica Health
Administration: It Looks Like msha Started With The
OSHA Rule And Proceeded To Cut Everything That
Looked Even Remotely Reasonable. Rock Products,
126(8), 58–58.
[49] Kissell, F. N. (2003). Handbook for Dust Control in
Mining. Centers for Disease Control and Prevention,
National Institute for Occupational Safety and
Health.
[50] Lawrence, A., Thollander, P., Andrei, M. and Karlsson,
M., 2019. Specific energy consumption/use (SEC) in
energy management for improving energy efficiency
in industry: Meaning, usage and differences. Energies,
12(2), p.247.
[51] Liu, T. and Liu, S., 2020. The impacts of coal dust
on miners’ health: a review. Environmental Research,
190, p.109849.
[52] Marais, J., Maré, P., &Brink, A. (2019). Automation
in Mining: The Advancement of Automation in the
Mining Industry and the Potential Impact on Mine
Workers. Journal of the Southern African Institute
of Mining and Metallurgy, 119(4), 281–288.
doi: 10.17159/2411-9717/2019/v119n4a8.
[53] Mazurek, J.M., Laney, A.S. and Wood, J.M., 2010.
Coal Workers’ Pneumoconiosis-Related Years of
Potential Life Lost Before Age 65 Years--United
States, 1968–2006. JAMA: Journal of the American
Medical Association, 303(16).
[54] Najjarpour, M., Jalalifar, H. and Norouzi-Apourvari,
S., 2022. Fifty years of experience in rate of pen-
etration management: Managed pressure drilling
technology, mechanical specific energy concept, bit
management approach and expert systems-A review.
Journal of Petroleum Science and Engineering, 208,
p.109184.
[55] Paluchamy, B., Mishra, D.P. and Panigrahi, D.C.,
2021. Airborne respirable dust in fully mechanised
underground metalliferous mines–Generation, health
impacts and control measures for cleaner production.
Journal of Cleaner Production, 296, p.126524.
[56] Peng, S. (2020). Modern Coal Mining Technology and
Safety. Journal of Mining Science, 56(4), 659–671.
doi: 10.1134/S1062739120040184.
[57] Proud, L., Tapoglou, N., Wika, K.K., Taylor, C.M.
and Slatter, T., 2023. Role of CO2 cooling strategies
in managing tool wear during the shoulder milling
of grade 2 commercially pure titanium. Wear, 524,
p.204798.
[58] Ramzi, R. and Bakar, E.A., 2018, May. Optical wear
inspection of countersink drill bit for drilling opera-
tion in aircraft manufacturing and assembly industry:
a method. In IOP conference series: materials science
and engineering (Vol. 370, No. 1, p. 012041). IOP
Publishing.
[59] Reynolds, L.E., Blackley, D.J., Laney, A.S. and
Halldin, C.N., 2017. Respiratory morbidity among
US coal miners in states outside of central Appalachia.
American journal of industrial medicine, 60(6),
pp.513–517.
[60] Shekarian, Y., 2020. An investigation of the effects of
mining parameters on the prevalence of coal worker’s
pneumoconiosis (CWP) risks among the US Coal Miners.
New Mexico Institute of Mining and Technology.
[61] Stuart, D., &O’Leary, T. (2020). Automation and its
Impact on the Mining Industry: A Study of Emerging
Technologies. Mining Engineering, 72(11), 23–28.
[62] Su, Y., Li, C., Zhao, G., Li, C. and Zhao, G., 2021.
Prediction models for specific energy consumption of
machine tools and surface roughness based on cutting
parameters and tool wear. Proceedings of the Institution
of Mechanical Engineers, Part B: Journal of Engineering
Manufacture, 235(6–7), pp.1225–1234.
[63] Thomas, L.P., 2023. Global standardization of
coal resources and reserves. In The Coal Handbook
(pp. 53–83). Woodhead Publishing.
[64] Uzun, M., Usca, Ü.A., Kuntoğlu, M. and Gupta,
M.K., 2022. Influence of tool path strategies on
machining time, tool wear, and surface rough-
ness during milling of AISI X210Cr12 steel. The
International Journal of Advanced Manufacturing
Technology, 119(3), pp.2709–2720.
[65] Williams, G., 2023. Social and economic costs and
benefits of coal. In The coal handbook (pp. 3–29).
Woodhead Publishing.
[66] World Coal Association. (2023). The Role of Coal in
the Energy Transition. Retrieved from https://www
.worldcoal.org.
[67] Xu, Y., Wang, S., &Li, H. (2018). Abrasive Wear in Coal
Cutting Tools: An Experimental Investigation. Wear,
408–409, 76–83. doi: 10.1016/j.wear.2018.05.015.