3874 XXXI International Mineral Processing Congress 2024 Proceedings/Washington, DC/Sep 29–Oct 3
Peuker, U.A., Kwade, A., Teipel, U., Jäckel, H.-G.
and Mütze, T., Aufbereitungstechnik: Aktuelle
verfahrenstechnische Fragestellungen für die
Aufbereitung von mineralischen, nachwachsenden
und sekundären Rohstoffen Positionspapier der
ProcessNet-Fachgruppen „Zerkleinern/Klassieren“,
„Grenzflächenbestimmte Systeme“, „Mechanische
Flüssigkeitsabtrennung“, 2012.
Popov, O., Talovina, I., Lieberwirth, H. and Duriagina, A.,
Quantitative Microstructural Analysis and X-ray
Computed Tomography of Ores and Rocks—
Comparison of Results. Minerals, 2020, 10 (2), 129.
doi: 10.3390/min10020129.
Reichert, M., Erzmahlung in Wälzmühlen. Dissertation,
2016, TU Bergakademie Freiberg, Freiberg.
Reichert, M., Gerold, C., Fredriksson, A., Adolfsson, G.
and Lieberwirth, H., Research of iron ore grinding in
a vertical-roller-mill. Minerals Engineering, 2015, 73,
109–115. doi: 10.1016/j.mineng.2014.07.021.
Rowland, C.A., Using the Bond work index to mea-
sure operating comminution efficiency. Minerals &
Metallurgical Processing, 1998, 15 (4), 32–36.
Saramak, D. and Kleiv, R.A., The effect of feed moisture
on the comminution efficiency of HPGR circuits.
Minerals Engineering, 2013, 105–111.
Schlesinger, M.E., King, M.J., Davenport, W.G. and
Sole, K.C., Extractive Metallurgy of Copper, 2011,
Elsevier, Amsterdam.
Schodde, R., Role of Technology and Innovation for
Identifying and Growing Economic Resources. In
AMIRA International’s 12th Biennial Exploration
Managers Conference, 2019.
Schröder, P., Schmidt, Jacob and Dörfel, L., Untersuchungen
und Verbesserungen an einer Mahlanlage. Projektarbeit,
2023, Freiberg.
Schubert, H., Heidenreich, E., Liepe, F. and
Neeße, T., Mechanische Verfahrenstechnik, 3rd
edn., Verfahrenstechnik, 1990, Dt. Verl. für
Grundstoffindustrie, Leipzig.
Segura-Salazar, J., Santos, N.d.S.L. and Tavares, L.M.,
Holistic Pre-Feasibility Study of Comminution Routes
for a Brazilian Itabirite Ore. Minerals, 2021, 11 (8),
894. doi: 10.3390/min11080894.
Stieß, M., Mechanische Verfahrenstechnik 2, 1997,
Springer, Berlin.
Stieß, M., Mechanische Verfahrenstechnik -
Partikeltechnologie 1, 3rd edn., 2009, Springer Berlin
Heidelberg, Berlin, Heidelberg.
van der Meer, F. P., Lessing, E. and Matthies, E., Iron ore
final grinding by high pressure grinding rolls and air
classification. In Proceedings Iron Ore, 2015.
Wills, B.A. and Finch, J.A., Wills’ Mineral Processing
Technology, 8th edn., 2016, Elsevier.
Yergin, D., Bonakdarpour, M., Bailey, T.M., Alekseenko, M.,
Beaufils, O., Hoffmann, F., Mothersole, J., Rajan, K.,
Wlodarczyk, N., Abbey, T., Burford, V., Marn, J.,
Salazar, E. and Selman, C., The Future of Copper,
2022.
Peuker, U.A., Kwade, A., Teipel, U., Jäckel, H.-G.
and Mütze, T., Aufbereitungstechnik: Aktuelle
verfahrenstechnische Fragestellungen für die
Aufbereitung von mineralischen, nachwachsenden
und sekundären Rohstoffen Positionspapier der
ProcessNet-Fachgruppen „Zerkleinern/Klassieren“,
„Grenzflächenbestimmte Systeme“, „Mechanische
Flüssigkeitsabtrennung“, 2012.
Popov, O., Talovina, I., Lieberwirth, H. and Duriagina, A.,
Quantitative Microstructural Analysis and X-ray
Computed Tomography of Ores and Rocks—
Comparison of Results. Minerals, 2020, 10 (2), 129.
doi: 10.3390/min10020129.
Reichert, M., Erzmahlung in Wälzmühlen. Dissertation,
2016, TU Bergakademie Freiberg, Freiberg.
Reichert, M., Gerold, C., Fredriksson, A., Adolfsson, G.
and Lieberwirth, H., Research of iron ore grinding in
a vertical-roller-mill. Minerals Engineering, 2015, 73,
109–115. doi: 10.1016/j.mineng.2014.07.021.
Rowland, C.A., Using the Bond work index to mea-
sure operating comminution efficiency. Minerals &
Metallurgical Processing, 1998, 15 (4), 32–36.
Saramak, D. and Kleiv, R.A., The effect of feed moisture
on the comminution efficiency of HPGR circuits.
Minerals Engineering, 2013, 105–111.
Schlesinger, M.E., King, M.J., Davenport, W.G. and
Sole, K.C., Extractive Metallurgy of Copper, 2011,
Elsevier, Amsterdam.
Schodde, R., Role of Technology and Innovation for
Identifying and Growing Economic Resources. In
AMIRA International’s 12th Biennial Exploration
Managers Conference, 2019.
Schröder, P., Schmidt, Jacob and Dörfel, L., Untersuchungen
und Verbesserungen an einer Mahlanlage. Projektarbeit,
2023, Freiberg.
Schubert, H., Heidenreich, E., Liepe, F. and
Neeße, T., Mechanische Verfahrenstechnik, 3rd
edn., Verfahrenstechnik, 1990, Dt. Verl. für
Grundstoffindustrie, Leipzig.
Segura-Salazar, J., Santos, N.d.S.L. and Tavares, L.M.,
Holistic Pre-Feasibility Study of Comminution Routes
for a Brazilian Itabirite Ore. Minerals, 2021, 11 (8),
894. doi: 10.3390/min11080894.
Stieß, M., Mechanische Verfahrenstechnik 2, 1997,
Springer, Berlin.
Stieß, M., Mechanische Verfahrenstechnik -
Partikeltechnologie 1, 3rd edn., 2009, Springer Berlin
Heidelberg, Berlin, Heidelberg.
van der Meer, F. P., Lessing, E. and Matthies, E., Iron ore
final grinding by high pressure grinding rolls and air
classification. In Proceedings Iron Ore, 2015.
Wills, B.A. and Finch, J.A., Wills’ Mineral Processing
Technology, 8th edn., 2016, Elsevier.
Yergin, D., Bonakdarpour, M., Bailey, T.M., Alekseenko, M.,
Beaufils, O., Hoffmann, F., Mothersole, J., Rajan, K.,
Wlodarczyk, N., Abbey, T., Burford, V., Marn, J.,
Salazar, E. and Selman, C., The Future of Copper,
2022.