9
Conference on Ground Control in Mining.
Morgantown, WV.
Heasley, K.A. (1989). “Understanding the Hydraulic
Pressure Cell. In Proceedings of the 30th US
Symposium on Rock Mechanics. Morgantown, WV.
pp. 485–492.
Mark, C. (1992). “Analysis of Longwall Pillar Stability
(ALPS): an update.” In Proceedings of the
International Workshop on Coal Pillar Mechanics and
Design, U.S. Bureau of Mines IC 9315. pp. 78–93.
Mark, C. and Agioutantis, Z. (2018). “Analysis of Coal
Pillar and Entry Stability (ACPS): A New Generation of
Pillar Design.” In Proceedings of the 37th International
Conference on Ground Control, Morgantown, W. VA.
pp. 1–6.
Mark, C. (2010). “Pillar Design for Deep Cover Retreat
Mining: ARMPS version 6 (2010).” In Proceedings
of the 3rd International Workshop on Coal Pillar
Mechanics and Design. pp. 106–121.
Mark, C. and Chase, F. E. (1997). “Analysis of Retreat
Mining Pillar Stability (ARMPS).” In: Proceedings of
the New Technology for Ground Control in Retreat
Mining. Pittsburgh, PA: NIOSH, IC 9446, pp. 17–34.
McElhinney, M., Minoski, T., Mazzella, M., Compton, C.,
and Sears, M. (2024). “Best Practices for Ensuring
Safety in Field Studies: A Comprehensive Guide for
Mining Researchers and Operators.” In Society for
Mining, Metallurgy, and Exploration, Inc. Preprint.
Phoenix, AZ
McElhinney, M., Compton, C., Mazzella, M., Minoski, T.,
Sears, M., Morris, M., and Bright, J. (2023). “Field
Instrumentation and Data Analysis of Ground
Movement and Pillar Performance at the Maple Eagle
Mine in Southern West Virginia.” In Proceedings of the
42nd International Conference on Ground Control in
Mining. Canonsburg, PA.
Minoski, T., McElhinney, M., Mazzella, M., Compton, C.,
and Sears, M. (2024). “Ground Control Monitoring:
A Comprehensive Guide for Mine Operators on
Instrumentation and Data Acquisition Currently Used
by the National Institute for Occupational Safety and
Health (NIOSH).” In Society for Mining, Metallurgy,
and Exploration, Inc. Preprint. Phoenix, AZ.
Sellers, J.B. (1970). “The Measurement of Rock Stress
Change Using Hydraulic Borehole Gages.” Int. J. Rock
Mech. Min. Sci. &Geomech. Abstr. Pergamon Press.
Gr. Br. Vol. 7, pp. 392–397.
Su, D. and Hasenfus, G.J. (1990). “Intrinsic Response of
Borehole Pressure Cells Laboratory Calibration and
Nonlinear FEM Simulation.” In Proceedings of the
9th International Conference on Ground Control in
Mining. Morgantown, WV. pp. 260–271.
Tulu, I. B. and Heasley, K A. (2012). “Investigating
Abutment Load.,” In Proceedings of the 31st
International Conference on Ground Control.
Morgantown, W. VA, pp 150–159.
Conference on Ground Control in Mining.
Morgantown, WV.
Heasley, K.A. (1989). “Understanding the Hydraulic
Pressure Cell. In Proceedings of the 30th US
Symposium on Rock Mechanics. Morgantown, WV.
pp. 485–492.
Mark, C. (1992). “Analysis of Longwall Pillar Stability
(ALPS): an update.” In Proceedings of the
International Workshop on Coal Pillar Mechanics and
Design, U.S. Bureau of Mines IC 9315. pp. 78–93.
Mark, C. and Agioutantis, Z. (2018). “Analysis of Coal
Pillar and Entry Stability (ACPS): A New Generation of
Pillar Design.” In Proceedings of the 37th International
Conference on Ground Control, Morgantown, W. VA.
pp. 1–6.
Mark, C. (2010). “Pillar Design for Deep Cover Retreat
Mining: ARMPS version 6 (2010).” In Proceedings
of the 3rd International Workshop on Coal Pillar
Mechanics and Design. pp. 106–121.
Mark, C. and Chase, F. E. (1997). “Analysis of Retreat
Mining Pillar Stability (ARMPS).” In: Proceedings of
the New Technology for Ground Control in Retreat
Mining. Pittsburgh, PA: NIOSH, IC 9446, pp. 17–34.
McElhinney, M., Minoski, T., Mazzella, M., Compton, C.,
and Sears, M. (2024). “Best Practices for Ensuring
Safety in Field Studies: A Comprehensive Guide for
Mining Researchers and Operators.” In Society for
Mining, Metallurgy, and Exploration, Inc. Preprint.
Phoenix, AZ
McElhinney, M., Compton, C., Mazzella, M., Minoski, T.,
Sears, M., Morris, M., and Bright, J. (2023). “Field
Instrumentation and Data Analysis of Ground
Movement and Pillar Performance at the Maple Eagle
Mine in Southern West Virginia.” In Proceedings of the
42nd International Conference on Ground Control in
Mining. Canonsburg, PA.
Minoski, T., McElhinney, M., Mazzella, M., Compton, C.,
and Sears, M. (2024). “Ground Control Monitoring:
A Comprehensive Guide for Mine Operators on
Instrumentation and Data Acquisition Currently Used
by the National Institute for Occupational Safety and
Health (NIOSH).” In Society for Mining, Metallurgy,
and Exploration, Inc. Preprint. Phoenix, AZ.
Sellers, J.B. (1970). “The Measurement of Rock Stress
Change Using Hydraulic Borehole Gages.” Int. J. Rock
Mech. Min. Sci. &Geomech. Abstr. Pergamon Press.
Gr. Br. Vol. 7, pp. 392–397.
Su, D. and Hasenfus, G.J. (1990). “Intrinsic Response of
Borehole Pressure Cells Laboratory Calibration and
Nonlinear FEM Simulation.” In Proceedings of the
9th International Conference on Ground Control in
Mining. Morgantown, WV. pp. 260–271.
Tulu, I. B. and Heasley, K A. (2012). “Investigating
Abutment Load.,” In Proceedings of the 31st
International Conference on Ground Control.
Morgantown, W. VA, pp 150–159.